Product introduction

CWDM SFP+ transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW/ER/ZR. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are 18 center wavelengths available from 1270 nm to 1610 nm, with each step 20 nm. A guaranteed minimum optical link budget of 14 dB is offered. The transmitter section uses a CWDM multiple quantum well DFB/EML laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

Product features

  1. Up to 10.5 Gb/s Bi-directional Data Links
  2. Can be used with single fiber CWDM system or dual fiber CWDM system
  3. Complaint to SFP+ MSA
  4. Maximum Link Length of 80 km at 10.3125Gb/s
  5. Uncooled 18-λ CWDM DFB/cooled EML LD: from 1270 nm to 1610 nm
  6. SFF-8472 Digital Diagnostic Function
  7. Single +3.3 V Power Supply

Product application

  1. 10G Ethernet
  2. 10G Fiber Channel
  3. CWDM Networks

Ordering information

Type Distance Data Rate Fiber Wave Interface Temp.
ZJ-SFP-10GCWDM-10 10KM 10G SMF CWDM Duplex LC 0 ~ 70°C
ZJ-SFP-10GCWDM-20 20KM 10G SMF CWDM Duplex LC 0 ~ 70°C
ZJ-SFP-10GCWDM-40 40KM 10G SMF CWDM Duplex LC 0 ~ 70°C
ZJ-SFP-10GCWDM-80 80KM 10G SMF CWDM Duplex LC 0 ~ 70°C